The Canon MP287 printer is renowned for its exceptional performance. Canon printers, like other gadgets, might, nonetheless, run into a number of issues. The error code P10, for instance, exists in one instance. The P10 error indicates that the printer has a general issue or “General Error” that has to be fixed right away. See the How to Tekno explanation below for details on how to fix the P10 Canon MP287 issue.
Here are the steps to overcome error P10 on Canon MP287 printer .
1. Turn off the printer and remove the power cable
The first step that must be taken is to turn off the printer and unplug the power cable from the power source. Leave the printer turned off for a few minutes.
This first step aims to reset the printer to its initial state and clear the memory cache which might cause errors. Apart from turning off and disconnecting the cable, also press the Power button for a few seconds to reset.
2. Check Cartridge and Infusion
One of the main causes of the P10 error is because there is a problem with installing the color cartridge or modifying the infusion on the printer . Check that the cartridge is installed correctly and that modifications to the infusion do not interfere with its movement.
If the cartridge is installed loosely or there is a problem with the infusion, carefully remove it and reinstall it. Make sure everything is installed correctly before turning on the printer .
3. Restart the Printer
After checking and ensuring all components are installed correctly, restart the printer . Pay attention to whether the P10 error code still appears or not. If the printer functions normally again, it means the problem has been resolved successfully.
4. Reset Printer to Factory Settings
If the steps above don’t work, try resetting the printer to factory settings via the maintenance menu in the printer software on your computer or laptop.
This step will return all printer settings to their default conditions , thereby eliminating any errors that occur.
5. Replace the problematic component
If the P10 error still appears after resetting, it is possible that the printer’s internal components are damaged. At this stage, certain components that are experiencing problems need to be replaced.
Check the condition of the mainboard or other parts related to cartridge operation and infusion modifications. If there is a problem with the component, immediately take the printer to an authorized Canon service center for treatment.
6. Check Connections and Other Components
Apart from problems with the cartridges and infusion, the P10 error can also be caused by problems with the connection between the printer and the power supply. Make sure all cables, including power and USB cables, are in good condition and that none are damaged or loose. If damage is found to the cable, immediately replace it with a new one.
By following the steps above, error P10 on the printer Canon MP287 can be resolved and functions as normal as before. If the problem persists, immediately consult an experienced technician or an authorized Canon service center for a complete repair.